HOMEPRODUCTCERAGEM MasterUser's manual
CERAGEM Massage Session Operating Instructions
 
  Session Work 01
The Internal Projector starts massaging at point 1 and makes 3 roundtrips back to the same point. The Projector will automatically apply massage pressure for approximately two minutes at each pressure point.
  Session Work 02
When the Projector reaches point 13, it will stay there for about 1 minute. At that time, turn your body over so you are in a face-down position. Use the abdominal massager to manually apply pressure to point 13, 14 and 15. Power will go off automatically as the projector completes its full routine.
 
 
Quick Reference Guide
 
 
 
 
 
 
  Massages upper body.
  Warms up upper body with Radiant Infrared Heated jade.
  Warms up upper body using the Epoxy Carbon Panel.
  Warms up lower body using the Epoxy Carbon Panel.
  Warms up abdominal area with Radiant Infrared Heated jade and massages.
 
How to use standard mode
1. Lie down your back on the main mat with your head on top of the main mat and your legs on the lower mat.
2. When using the automatic mode, you may use the 3-sphere or the 9-sphere Projector to massage the abdominal area and arms.
3. You may repeat the automatic program or you may switch to the manual mode and apply it to specific parts of your body.
 
 
  Massages lower body.
  Warms up lower body.
  Warms up lower body using the Epoxy Carbon Panel.
  Warms up upper body using the Epoxy Carbon Panel.
  Warms up abdominal area with Radiant Infrared
  Heated jade and massages.
 
How to use the applied standard mode
1. Lie down with your back on the mat with your head on the lower mat and your legs on the main mat.
2. Follow the directions as stated for the standard mode procedure.
Direction is the same as the standard mode. You may use the 3-sphere Projector or the 9-sphere Projector to massage abdominal area and arms.
 
 
  Massages abdominal area.
  Warms up abdominal area with Radiant Infrared
  Heated jade.
  Warms up abdominal using the Epoxy Carbon Panel.
  Warms up lower body using the Epoxy Carbon Panel.
 
How to use abdominal mode
1. Lie down with your stomach on the mat so that your head is on the main mat and your legs are on the lower mat.
2. Use the manual mode when massaging the abdominal area.
- Caution: Do not use the abdominal massager on your chest.
  Always use the manual mode only when massaging the abdominal area.
 
 
Two people may use the unit simultaneously. One person can use the standard mode while the other person massages either their upper or lower body.
 
How to use two-person mode
1. One person uses the standard mode.
2. The other person sits on the 3-sphere Projector.
3. Use the same directions for the standard mode and apply the 9-sphere projector onto your abdomen or arms.
 
 
  Warms up lower body with the Epoxy Carbon Panel.
  Warms up the upper body with Radiant Infrared Heated jade.
 
How to use seated mode
1. While the main power is off, you can set up the desired temperature on the Epoxy Carbon Panel temperature control.
2. Sit on the mat with your legs on the lower mat.
3. You may repeat the automatic program or you may switch to the manual mode and apply it to specific parts of your body.